Stainless steel joint installation process and processing method
Compared with welded joints, stainless steel joints will not be affected in the process of installation due to oxide skin pollution of pipeline cleanliness. Stainless steel joints are widely used in oil refining, chemical, petroleum, food, pharmaceutical, instrumentation and other fields of oil, gas, water and other pipeline systems, stainless steel joints to use precision seamless steel pipe, it is recommended to use hydraulic flaring type joints. Stainless steel joint has good sealing, easy and convenient to use, stainless steel joint sealing is very good. Whether in blocking liquid circulation, or in the isolation of steam and other levels can fully play a very large effect.
Stainless steel joint installation is convenient, generally only ten minutes, in the maintenance level is relatively simple, do not need to do very care. The stainless steel joint has the characteristics of strong connection, high pressure resistance, temperature resistance, sealing, and repeatability, easy installation and maintenance. With the rapid development of petroleum, chemical, refining and other industries, the product quality requirements, stainless steel joints play a very key role, greatly improving the sealing performance of the product. The stainless steel joint is composed of three parts: joint body, clamp sleeve and nut.
When the sleeve and nut sleeve, on the steel pipe, after inserting the joint body, tighten the nut, the front side of the sleeve, fit the cone surface of the joint body, seamless steel pipe, is evenly bitten by the inner edge, so the formation of an effective seal. Stainless steel joint is oil refining, chemical, petroleum, food, pharmaceutical, instrument and meter, system automatic control device pipeline, a more advanced connector. The role of stainless steel joint in industry is still very large, but also has been widely promoted and applied. The stainless steel joint is processed by precision CNC machine tool and contains double raceway support structure, so it is flexible, portable and reliable.
Stainless steel joint made of reinforced ptfe material, lined with stainless steel elastic support ring, sealed by polishing, with superior self-lubrication. Stainless steel joint is the introduction of special processing or CNC lathe processing, or relatively high requirements, the inner ring is made of stainless steel, the outer ring is 45# steel quenching and tempering treatment, compact and flexible structure. In the construction of stainless steel joint and pipeline in series, used for tank car and trestle storage and transportation pipeline, liquid medium transmission operation equipment.
180-5173-0171
Room 801-A, 8th Floor, Liancai Center Building, No. 18, Chunxu Road, Kunshan Economic Development Zone, Jiangsu Province
www.bonneville-cleantech.com
Sweep yards attention